Product overview
-According to international standard container design and manufacturing, 20 feet are used for containers below 1000KVA, and 40 feet are used for containers above 1250KVA;
-Having CSC certification in compliance with international container safety conventions, the entire set can be directly shipped as a standard container, greatly saving transportation costs;
-Two explosion-proof lights are installed inside the container/one explosion-proof light is installed on the control screen for easy operation and maintenance by users;
-The container can be opened at both the front and back, and there are side doors on both sides of the box for easy maintenance and repair by users. There is a ladder outside the box; All hinges, locks, and bolts are made of stainless steel, and anti wave and anti rainwater intrusion devices are installed inside the container;
-The control screen and output switch cabinet are located on the same side of the container, making it convenient for users to perform daily operations and connect output cables;
-The standard configuration includes a permanent magnet excitation PMG system, which improves the starting ability of the motor and has immunity to waveform distortion;
-The fuel tank and pipelines, oil discharge, muffler, and other unique design features are highly favored by users;
-The interior of the silent box is not only made of high-performance, anti-aging, flame-retardant sound insulation materials and sound-absorbing materials, but also has a wonderful design for air intake and exhaust noise reduction.
Product advantage
-The load-bearing structure of the base: When the generator set is running in parallel, the load-bearing capacity of the container base is twice the wet weight of the generator set and the weight of the container; When the generator set operates alone, the load-bearing capacity of the base is 1.25-1.5 times the wet weight of the generator set and the weight of the container. In the design, it is necessary to strengthen the load-bearing design of the base to avoid deformation of the base during the operation of the unit.
-The water inlet and outlet of the water tank: The water inlet of the water tank is a pressure cap, which requires a considerable amount of torque when opened for maintenance and repair. Therefore, more than 300MM of operating space must be reserved in the design. If the height of the container is limited, the water inlet can be led to an easily accessible location outside the container, and flexible connections should be used. The outlet of the water tank is a manual valve, and space should be reserved for operation and maintenance during design to prevent water accumulation during drainage. If it is led outdoors, please consider the vibration during unit operation and use corresponding flexible connections.
-Rainwater prevention measures for air inlet and outlet
a. The air inlet is generally close to the generator. If rainwater enters the container during the operation of the unit, especially into electrical equipment such as the generator, it will be very dangerous. Therefore, when designing the air inlet, in addition to meeting the air inlet area, careful consideration should also be given to waterproof measures (such as louvers, deviation from electrical equipment, etc.).
b. The container and radiator are both steel products. If rainwater enters the exhaust outlet, the container drainage design must be done well. Because water alone cannot corrode steel products, but the combination of water and oxygen in the air will corrode steel products. This is also the main reason why water accumulation should be prevented inside the container. Especially for some top exhaust designs, rainwater directly enters the container. If the drainage is not smooth and water accumulates, it will seriously affect the service life of the container and generator water tank. Therefore, container drainage measures must be in place and no water accumulation is allowed inside the container.
-Remote Control Panel for High Voltage Unit: Cat ® According to the principle of high and low voltage separation, the control panel of the high-voltage unit is installed separately. In the design, the installation space of the control panel and the observation operation window should be designed.
-Low voltage distribution box: The generator set water jacket water heater, moisture drive heater, mains charger, and lighting inside the box all require mains power supply, so the low voltage distribution box is a must-have for containerized generator sets. The operation of low-voltage distribution boxes is usually carried out when the unit is stopped, and the installation and operating space of the distribution box need to be considered when designing the container.
-Generator maintenance space: There are vulnerable parts such as rectifiers inside the generator, so there should be sufficient space for operation and maintenance behind the generator.
-Battery pack maintenance space: The battery pack is usually placed at the side door opening of the container to ensure space for battery maintenance and repair.
-Installation and maintenance space for generator outlet box: The generator outlet box requires the installation of output cables or busbars, so sufficient installation and maintenance space needs to be reserved at the generator outlet box. Or reserve operation doors and windows in corresponding positions.
-Daily fuel tank operation and maintenance space: The daily fuel tank needs to be drained and discharged, and the design needs to consider the operation and maintenance space of the daily fuel tank, and ensure that the exhaust hole of the daily fuel tank is led to a safe outdoor location.
Business Cooperation
Grow business with Hengfengyou
Our goal is to become the world's leading manufacturer of electrical equipment. The business, experience and technology accumulated over the years have benefited customers in more than 50 countries around the world. Once our customers establish a cooperative relationship, they are long-term trusted customers, because Hengfengyou always insists on providing you with our best electrical products and services.
Our advantages
- Authoritative certification: ISO9001、CE、CCC、COC、UL、CSA, etc
- Perfect SQA quality management system and patented technology to ensure high quality products
- Efficient production equipment and low raw material prices to ensure the price advantage
- Sufficient inventory, short delivery time and fast delivery worldwide
- Perfect after-sales service system, allowing customers to buy worry-free
- Provide OEM/ODM services. Welcome clients to visit our factory.
